That is a sexy vent ... in as much as a vent can be sexy. The contour follows the dash lines. And, it's got a feature that is fairly important in my case - it's pencil proof. *thumbs up*
I kind of liked this look also but the vent just didn't seem to fit the dash right
so this became a "what if project"
this went easier than I thought it would.
I had that one vent from the VW Jetta(The car uses just a single vent) that I thought fit the dash pretty good, Sooo what if I took the screen cover off of the Volvo vent and put it on the Jetta vent. The width fit pretty good but of course I had to shorten the length to fit the Jetta vent.
The one thing that I needed to do is to reshape the ends to fit the lines of the new vent.
Jetta Vent
I took a piece of aluminum and made a form to reshape the perforated material around.
It took me longer to shape the aluminum than it did to shape the perforated material.
With some gentle tapping with a block of wood it was finished. I still need to touch up the black paint at the edges a little but overall it was a easy job